IAE Academy

FOR CORE AND IT JOBS · 7 CHAPTERS

PLC and Industrial Automation

For EE and AEIE students. Short chapters, in reading order: plc hardware, ladder logic, timers and counters, scada and dcs, industrial networks and drives. Each one explains its ideas from first principles, with worked examples and questions to check yourself.

The chapters, in order

  1. CHAPTER 1

    Industrial automation and the PLC

    This chapter explains why plant logic moved from relay panels into PLC programs, what is inside a PLC, and how the scan cycle and image tables decide when it sees an input and acts.

    Builds on the GATE topics: Process control (IN) (Control Systems)

  2. CHAPTER 2

    Inputs, outputs and field devices

    This chapter follows a signal from a field device into a PLC input module and from an output module back out to a load.

    Read first: Chapter 1, Automation and the PLC

    Builds on the GATE topics: 4-20 mA & networks (Sensors and Industrial Instrumentation) · Sensing principles (Sensors and Industrial Instrumentation)

  3. CHAPTER 3

    Ladder logic

    This chapter reads a ladder rung as a Boolean equation and builds the standard circuits from it: start-stop with seal-in, set and reset coils, interlocks and the fail-safe stop.

    Read first: Chapter 2, Inputs, outputs, devices

  4. CHAPTER 4

    Timers, counters and sequences

    This chapter explains how a PLC measures time, counts events and runs a machine through ordered steps.

    Read first: Chapter 3, Ladder logic

  5. CHAPTER 5

    Analog control and PID in a PLC

    A PLC can hold a process variable at a set point by running a PID (proportional-integral-derivative) calculation every sample.

    Read first: Chapter 4, Timers and sequences

    Builds on the GATE topics: Process control (IN) (Control Systems) · Compensators & PID (Control Systems)

  6. CHAPTER 6

    SCADA, DCS and HMI

    This chapter explains how a SCADA system polls its tags, what an operator sees on an HMI, and how a DCS differs from PLC plus SCADA.

    Read first: Chapter 5, Analog control and PID

    Builds on the GATE topics: Process control (IN) (Control Systems)

  7. CHAPTER 7

    Industrial networks, drives and safety

    A connected machine needs a data link to its devices, speed control for its motors and a stop that works when a part fails.

    Read first: Chapter 6, SCADA, DCS and HMI

    Builds on the GATE topics: Inverters & PWM (Power Electronics) · Induction machines (Electrical Machines)

Who hires

What companies publish for students, by department: Core jobs for EE · Core jobs for AEIE

All subjects for core and IT jobs