IAE Academy

FIRST YEAR · CHEMISTRY · CHAPTER 4 OF 8

Chemical kinetics: rates, order and catalysis

This chapter explains how fast a reaction goes and what the speed depends on: concentration through the rate law, temperature through the Arrhenius equation, and a catalyst through a lower-energy path. An engineer needs it to size reactors, predict shelf life and choose operating temperatures.

Updated 30 Oct 2026

What you will be able to do

You will write a rate law and read off the order of a reaction from data. You will use the integrated first-order law to find a concentration or a half-life. You will find an activation energy from rates at two temperatures. You will explain what a catalyst changes and what it cannot change.

Before you start

  1. Chapter 3, Thermodynamics, free energy and equilibrium

  2. Natural logarithms and exponentials

  3. Derivatives as rates of change, such as

  4. Integration of and

  5. Separating variables in a simple differential equation

  6. pH as a measure of acidity

Rate, rate law and order

Thermodynamics told you whether a reaction can go. It said nothing about how fast. The speed is the rate: how quickly a concentration changes with time. Experiment shows that the rate depends on the concentrations of the reactants raised to powers that you must measure. They are not read from the balanced equation.

RATE OF REACTION

For at constant volume. and are concentrations in mol/L; for dilute solutions, activities (the effective concentrations used in and ) are taken as these concentrations. is time in s, so is in mol/(L s). is the rate of change of ; the minus sign makes positive, since a reactant falls.

RATE LAW

and are the orders in A and B, found by experiment. The overall order is . is the rate constant. Its unit follows from the order: s for first order, L/(mol s) for second order, mol/(L s) for zero order. depends on temperature and on a catalyst if one is present, not on concentration.

Most reactions happen as a sequence of simple steps, called the mechanism. A step in which particles actually meet and react, exactly as written, is an elementary step.

Quantity

What it is

Where it comes from

Order

Sum of the powers in the measured rate law; may be zero or a fraction

Experiment

Molecularity

Number of species colliding in one elementary step: 1, 2 or rarely 3

The mechanism

For one elementary step, the order equals the molecularity: a step in which X and Y collide has the rate . When the first step is much slower than the rest, it sets the rate and is called the rate-determining step; the order then follows that step, not the overall equation. For below about 500 K the rate is , because the rate-determining step is ; is an intermediate, a species made in one step and used up in a later one (). A reactant in large excess lowers the observed order: in acid-catalysed ester hydrolysis the ester reacts with water, but hardly changes, so the rate is first order in the ester.

WATCH OUT FOR

Assuming the order equals the coefficients in the balanced equation. Test: double one concentration with the others fixed. If the rate doubles, the order in that species is 1; if it rises fourfold, 2; if it does not change, 0.

Integrated laws and half-life

The rate law gives the speed now. Integrating it gives the concentration at any later time. Take the simplest case, a reaction whose rate is proportional to one concentration. The rate falls as the reactant is used up, so the decay slows down smoothly.

INTEGRATED FIRST-ORDER LAW

Holds for products with one A used per reaction (, so ) and , at constant temperature and volume. Separate the variables and integrate from to . is the concentration at ; is in s. A plot of against is a straight line of slope .

FIRST-ORDER HALF-LIFE

Put in the law above, so . Valid for first order only. does not depend on : every half-life halves what is left, whatever the starting amount.

INTEGRATED SECOND-ORDER LAW

Holds for products with and , at constant temperature and volume; is in L/(mol s). against is the straight line. Putting gives , which depends on the starting concentration.

WORKED EXAMPLE

A first-order reaction has a half-life of 10 min. It starts at mol/L. Find and the concentration after 30 min.

Solution
  1. The reaction is first order, so . This is the only order in which the half-life is fixed by alone. min.

  2. Use because we know and . The right side is .

  3. So and mol/L.

  4. Check: 30 min is three half-lives, and .

Answer: min and mol/L.

Temperature and catalysts

A rise of 10 K near room temperature can double a rate, as the example below shows. Molecules react only when they collide with at least a minimum energy, the activation energy . In this simple collision picture, the fraction of collisions with that much energy is , and a higher temperature raises it sharply. A catalyst works on the other side: it does not heat the molecules, it offers a path with a lower barrier.

ARRHENIUS EQUATION

Holds over a modest temperature range, with and taken as constant. here is the pre-exponential factor, with the unit of ; it is not the reactant A. is in kelvin and J/(mol K) is the gas constant. is in kJ/mol; convert it to J/mol before use with .

ACTIVATION ENERGY FROM TWO TEMPERATURES

Assumes the same and at both temperatures. Write the logarithm at and at and subtract, which removes . and are rate constants at and in kelvin. A plot of against is a line of slope .

WORKED EXAMPLE

The rate constant of a reaction doubles when the temperature rises from 300 K to 310 K. Find in kJ/mol.

Solution
  1. Use the two-temperature form because two rates are known and is not.

  2. . The bracket is K.

  3. J/mol.

  4. Convert to kJ/mol by dividing by 1000.

Answer: kJ/mol.

Kind

Phase

Example

How it acts

Homogeneous

Same phase as the reactants

in solution speeding up ester hydrolysis

Forms an intermediate with a reactant, then is regenerated

Heterogeneous

Different phase

Iron for ; Pt and Rh in a car exhaust converter

Reactants bind to the surface and react, then the products leave

A catalyst is regenerated, not used up. It leaves the energies of reactants and products unchanged, so it lowers for the forward and the reverse reaction by the same amount. depends only on the states of reactants and products, so , from , is unchanged. The reaction reaches the same equilibrium sooner.

An enzyme is a protein catalyst: a long chain of amino acids folded into a fixed shape. The reactant, called the substrate, binds in a pocket of that shape, the active site, whose shape and charges fit the substrate closely. Bound there, it reacts along a lower-energy path, so one specific reaction speeds up greatly at mild temperature and pH. Catalase, for example, speeds up . Strong heating or a large change in pH makes the chain lose its folded shape, and the activity is lost.

IN ONE LINE

Concentration enters through the order, temperature through , and a catalyst through a smaller .

Check yourself

CHECK YOURSELF 1

A reaction has the rate law with concentrations in mol/L and time in s. What is the unit of ?

  1. (A)

    s

  2. (B)

    mol/(L s)

  3. (C)

    L/(mol s)

  4. (D)

    mol/(L s)

Answer and solution

Answer: (C)

  1. The rate has the unit mol/(L s).

  2. , so the unit is L/(mol s).

CHECK YOURSELF 2

For products at a fixed temperature, three runs give these initial rates. Run 1: , mol/L, rate mol/(L s). Run 2: , mol/L, rate mol/(L s). Run 3: , mol/L, rate mol/(L s). Which is the rate law?

  1. (A)

  2. (B)

  3. (C)

  4. (D)

Answer and solution

Answer: (B)

  1. Runs 1 and 2: doubles with fixed and the rate rises fourfold, so and .

  2. Runs 1 and 3: doubles with fixed and the rate does not change, so .

  3. So .

CHECK YOURSELF 3One or more options are correct

A catalyst is added to a reversible reaction at a fixed temperature. Which statements are correct?

  1. (A)

    It provides a path with a lower activation energy.

  2. (B)

    It shifts the equilibrium towards the products.

  3. (C)

    It raises the rate constants of the forward and the reverse reaction.

  4. (D)

    It changes of the reaction.

Answer and solution

Answer: (A), (C)

  1. A catalyst gives a lower-barrier path, so A is correct.

  2. is fixed by the reactants and products, so D is wrong and is unchanged, so B is wrong.

  3. The lower barrier applies in both directions, so both rate constants rise: C is correct.

CHECK YOURSELF 4

For a reaction, s at 300 K and s at 320 K. Find in kJ/mol. Use J/(mol K).

Answer and solution

Answer: (accepted range )

  1. , so .

  2. K.

  3. J/mol, about 83 kJ/mol.

Used in these GATE topics