IAE Academy

FIRST YEAR · CHEMISTRY · CHAPTER 6 OF 8

Polymers, composites and nanomaterials

This chapter explains how polymer chains are built, why their structure decides whether a material melts, chars or springs back, and why composites and nanoparticles differ from bulk materials. An engineer needs it to choose a material and predict its response to heat and load.

Updated 30 Oct 2026

What you will be able to do

You will tell an addition polymer from a condensation polymer by comparing a repeat unit with its monomers. You will explain from structure why a thermoplastic softens, a thermoset chars and rubber springs back. You will calculate a chain's molar mass, an upper limit on the fraction of units cross-linked by sulfur, and a fibre composite's stiffness. You will explain why a nanoparticle is more reactive than bulk material.

Before you start

  1. Covalent bonds, the bond in alkenes, and van der Waals forces and hydrogen bonds between molecules

  2. Functional groups , , , and the amide and ester links they form

  3. Oxidation as loss of electrons and reduction as gain

  4. Moles and molar mass in g/mol

  5. Stress, strain and Young's modulus; force as stress times area

  6. Surface area and volume of a sphere, and for small

Chains and how they are built

A polymer is one molecule made of a very large number of repeat units, joined by covalent bonds and built from small molecules called monomers. In addition polymerisation each monomer opens a bond and joins the next, and no atoms are lost: ethene, , gives polyethylene, , and vinyl chloride, , gives PVC, . In condensation polymerisation each monomer has two reactive groups, and every join releases a small molecule, usually water. A diamine with a diacid gives a polyamide such as nylon-6,6, . A diol with a diacid gives a polyester such as PET, from ethane-1,2-diol and benzene-1,4-dicarboxylic acid.

CHAIN MASS OF A POLYMER

is the chain's molar mass, the number of repeat units and the repeat unit's molar mass, all masses in g/mol. For an addition polymer no atoms are lost, so is the monomer's molar mass. End groups are ignored, and real samples hold chains of different lengths, so is an average.

REPEAT UNIT OF NYLON-6,6

Holds for nylon-6,6, where one diamine and one diacid form two amide links and release two water molecules. All masses are in g/mol. With hexane-1,6-diamine (116.2), hexanedioic acid (146.1) and water (18.0) this gives g/mol per repeat unit.

Feature

Addition

Condensation

Small molecule released

none

usually water

Repeat unit against monomers

same atoms

fewer atoms

Backbone

carbon only, from monomers

contains links such as amide or ester

WATCH OUT FOR

Two different monomers do not by themselves mean condensation, and an atom such as Cl in the chain does not mean one was lost. Test: add up the atoms of the monomers and compare with one repeat unit. Any atoms missing means condensation.

WORKED EXAMPLE

A polyethylene sample has an average molar mass of 140 000 g/mol. Ethene, , has a molar mass of 28 g/mol. How many repeat units are in an average chain?

Solution
  1. Polyethylene is an addition polymer, so no atoms are lost and each repeat unit has the mass of one ethene molecule: g/mol.

  2. The chain mass is the number of units times the unit mass, , so .

  3. .

Answer: About 5000 repeat units per chain, as an average.

Structure decides behaviour

How the chains are arranged decides what heat does. In a thermoplastic the chains are separate, held only by intermolecular forces (van der Waals forces, or hydrogen bonds in nylon) that are far weaker than covalent bonds. Heating loosens those forces, so the chains slide and the plastic flows and can be remoulded; cooling sets it again. In a thermoset, covalent cross-links tie the chains into one network: the chains cannot slide, so it does not melt, and strong heating breaks covalent bonds and chars it.

Class

Structure

On heating

Remoulded?

Such as

Thermoplastic

separate chains

softens and flows

yes

polyethylene, PVC, nylon

Thermoset

cross-linked network

does not melt; chars if heated strongly

no

Bakelite, epoxy

Elastomer

coiled chains, few cross-links

does not flow

no, once linked

vulcanised rubber

In an elastomer the coiled chains carry a few cross-links: stretching uncoils them, the links stop them slipping apart, and on release they coil back. Natural rubber is polyisoprene, . Its repeat unit has the formula of isoprene, , which has two bonds; in the chain the units join through their end carbons, and one remains between the middle two. Raw rubber is soft and sticky because its chains slip past each other. Heating it with sulfur builds sulfur bridges between chains at or beside those double bonds: this is vulcanisation, and the rubber becomes stronger, less sticky and springs back after stretching.

FRACTION OF UNITS CROSS-LINKED

An upper limit: it assumes all the sulfur reacts and each sulfur atom bridges two different isoprene units. Real bridges are often chains of several sulfur atoms, so fewer units are linked. is the fraction of units linked; and are the masses of sulfur and rubber in g; 32.06 g/mol is sulfur and 68.12 g/mol the unit .

WATCH OUT FOR

More cross-links do not mean better rubber. Test: ask whether the chain between neighbouring links is long enough to coil. If it is, stretching uncoils it and it springs back; if the links are close, nothing can uncoil and the solid is hard.

WORKED EXAMPLE

A batch has 100 g of natural rubber and 3 g of sulfur. Find the upper limit on the fraction of isoprene units cross-linked.

Solution
  1. Each sulfur atom is assumed to join two units, so the units used are twice the moles of sulfur. This gives an upper limit.

  2. Moles of sulfur: mol. Units used: mol.

  3. Moles of isoprene units: mol.

  4. .

Answer: At most about 13% of the units are cross-linked; the true fraction is smaller.

Special polymers, composites and nanomaterials

Some polymers are chosen for what their chains can do: carry a current, or break down after use.

Polymer

Why it behaves so

Uses

Conducting: doped polyacetylene

its chain has alternating single and double bonds, so the electrons of the double bonds can spread along the chain. Doping adds a little oxidiser such as , which removes some of these electrons, or a reducer such as sodium, which adds some. The charges created move along the chain and conductivity rises by many orders of magnitude

it degrades in air, so it serves mainly as the model material; more stable conducting polymers on the same idea, such as polyaniline, are used in antistatic coatings, sensors and flexible electronics

Biodegradable: polylactic acid (PLA)

a polyester of lactic acid, , whose units are joined by ester links; water breaks the ester links and microbes digest the fragments

absorbable sutures, packaging for industrial composting

A composite joins two or more materials that stay distinct: a matrix that holds the shape and passes the load on, and a reinforcement that carries most of it. Glass or carbon fibre in a polymer matrix is fibre-reinforced plastic, stiff and strong for its weight. When long fibres lie along the load, fibre and matrix share it, which gives a simple estimate of stiffness.

STRESS SHARED BY FIBRE AND MATRIX

Holds for long fibres running the full length along the load, with no voids. Forces add, and force is stress times area: . Divide by . Full-length fibres make the area fraction equal the fibre volume fraction . is stress, cross-section area; subscripts c, f, m mean composite, fibre, matrix.

STIFFNESS OF A FIBRE COMPOSITE

Holds when fibre and matrix are perfectly bonded, so they share one strain , and both stay elastic, so for each. Divide the stress sum above by . is Young's modulus in GPa of composite, fibre and matrix; is the fibre volume fraction.

Nanomaterials have at least one dimension between about 1 and 100 nm. One main reason their properties differ from the bulk is that a large share of their atoms sits at the surface, where each atom has fewer neighbours. Surface atoms are more weakly held and more reactive, so nanoparticles catalyse reactions faster per gram and melt at lower temperatures than the bulk solid.

SURFACE TO VOLUME RATIO OF A SPHERE

Holds for a sphere of radius . The ratio is in 1/nm if is in nm. Halving the radius doubles the ratio.

FRACTION OF ATOMS AT THE SURFACE

Holds for , treating the surface as a shell one atom thick and the atoms as evenly spread, so the atom fraction equals the shell's volume fraction . is the atomic diameter, about 0.25 nm, in the same unit as . So .

Check yourself

CHECK YOURSELF 1

Which of these is made by condensation polymerisation?

  1. (A)

    Polyethylene

  2. (B)

    PVC

  3. (C)

    Nylon-6,6

  4. (D)

    Polystyrene

Answer and solution

Answer: (C)

  1. Polyethylene, PVC and polystyrene are built from monomers (ethene, vinyl chloride, styrene) with no atoms lost, so they are addition polymers.

  2. Nylon-6,6 forms from a diamine and a diacid with loss of water, so it is a condensation polymer.

CHECK YOURSELF 2

Why can a thermoset not be softened and reshaped by heating?

  1. (A)

    Its chains are held only by weak forces

  2. (B)

    Its chains are joined by covalent cross-links into one network

  3. (C)

    Its chains are too short to move

  4. (D)

    It contains no carbon

Answer and solution

Answer: (B)

  1. Chains cannot slide in a covalently cross-linked network.

  2. Strong heating breaks the bonds themselves, so the material chars instead of flowing.

CHECK YOURSELF 3One or more options are correct

A spherical particle's radius is reduced from 50 nm to 5 nm. Take the atomic diameter as 0.25 nm. Which statements are correct?

  1. (A)

    Its surface-to-volume ratio rises tenfold.

  2. (B)

    The fraction of its atoms at the surface rises about tenfold.

  3. (C)

    Its surface-to-volume ratio rises a hundredfold.

  4. (D)

    Its volume falls tenfold.

Answer and solution

Answer: (A), (B)

  1. : per nm and per nm, a tenfold rise. A is correct and C is wrong.

  2. also goes as : and , about tenfold. B is correct.

  3. Volume goes as , so it falls by times. D is wrong.

CHECK YOURSELF 4

A composite has long fibres aligned with the load and perfectly bonded to the matrix, with fibre volume fraction 0.5. The fibre has GPa and the matrix has GPa. Find the composite modulus along the fibres in GPa.

Answer and solution

Answer: (accepted range )

  1. Use .

  2. GPa.