IAE Academy

GATE 2026 DA GA Q.3: official answer

GATE 2026 · DAGA Q.3 · 1 mark · MCQ

The four pieces of a puzzle are shown in the figure below.

Which one of the figures labelled as P, Q, R, and S can be constructed by using each of the four pieces only once without overlaps?

GATE 2026 DA GA question 3: Top: four black pieces on white.Tap to open full size
Figure from the GATE 2026 DA paper. It is part of the question.
Figure description

Top: four black pieces on white. Piece 1 (far left): a tall piece with a vertical left edge, a pointed top, a concave circular notch on its right side and a zigzag notch lower down on the right. Piece 2: an inverted triangle or trapezoid with a flat top edge and a concave semicircular dome notch cut into its lower middle, plus a small notch at lower right. Piece 3: a tall triangular piece with a vertical right edge, a diagonal left edge and a thin spike (beak) pointing left near the top, with a small notch below the spike. Piece 4 (bottom right): a flat-based triangle with two peaks (a small peak on the left and a large peak on the right). Below: four white shapes on black squares, labelled P, Q, R, S. P: a round head with a long pointed beak to the right, above a diamond (45-degree square) body at lower left. Q: a round head with a flat cut at top right and no beak, above a diamond body. R: a round head with a beak to the right, above a flat-bottomed trapezoid body. S: a head with a semicircular wedge, a beak pointing right, and a diamond body, with a visible gap between head and beak.

  1. (A)

    P

  2. (B)

    Q

  3. (C)

    R

  4. (D)

    S

Official answer

From the GATE 2026 DA paper. Every question of this paper · Download the full paper · All 48 Spatial questions, with notes

More Spatial questions