IAE Academy

FIRST YEAR · PHYSICS · CHAPTER 4 OF 7

Polarisation, lasers and optical fibres

This chapter explains how light with a fixed field direction is made and changed, how a laser builds a coherent beam from stimulated emission, and how an optical fibre traps light. An engineer needs it to understand polarisers, wave plates, laser sources and fibre links.

Updated 30 Oct 2026

What you will be able to do

You will be able to find the intensity of light after a polariser and an analyser, and choose the thickness of a wave plate that turns linear light into circular light. You will be able to explain why a laser needs population inversion and why its light is coherent, monochromatic and directional. You will be able to find the acceptance angle and numerical aperture of an optical fibre.

Before you start

  1. Chapter 3, Interference and diffraction of light

  2. Snell's law and the refractive index (some texts write )

  3. The photon energy , with eV nm

  4. The Boltzmann factor for populations in thermal equilibrium

  5. The exponential function and powers of ten

  6. Trigonometry: , and

Polarised light, double refraction and wave plates

Light is a transverse wave: the electric field oscillates at right angles to the direction of travel. In unpolarised light that direction changes at random from moment to moment; in linearly polarised light it stays fixed. An ideal polariser passes only the field component along its transmission axis.

MALUS' LAW

Linearly polarised light, ideal analyser. and are the intensities (W/m) reaching and leaving the analyser; is the angle between the field and the analyser axis. The field has component along the axis, and . Unpolarised light: over random directions and have the same average and add to 1, so each averages and an ideal polariser passes half.

WORKED EXAMPLE

Unpolarised light of intensity 100 W/m falls on a polariser. A second polariser (the analyser) has its axis at 60 to the first. Find the intensity that emerges.

Solution
  1. The first polariser passes half of unpolarised light: W/m. The light is now polarised along its axis.

  2. The analyser is at to that direction, so Malus' law applies: .

  3. , so and W/m.

Answer: 12.5 W/m

In a uniaxial crystal such as calcite, the speed of light depends on how its field lies relative to one direction, the optic axis. For light travelling at right angles to the axis, the part with its field perpendicular to the axis is the ordinary ray (index ) and the part with its field along the axis is the extraordinary ray (index ). In general one beam entering the crystal splits into two rays polarised at right angles. For calcite at 589 nm, and . A plate of thickness cut with the axis parallel to its faces, at normal incidence, keeps the two rays on one path at speeds and , so one falls behind the other.

PHASE DIFFERENCE INTRODUCED BY A PLATE

Axis parallel to the faces, normal incidence. is the thickness and the vacuum wavelength, both in m. The extra optical path is , and one wavelength of path is a phase of (Chapter 3). is in radians.

THICKNESS OF QUARTER-WAVE AND HALF-WAVE PLATES

Set and in the last formula. These are the thinnest plates; odd multiples of each also work.

Let the light travel along , with along the optic axis and across it; is the angular frequency (rad/s). Linear light at to the axis has and of equal amplitude ; in calcite , the ordinary ray, falls behind. After a quarter-wave plate, and , so : at a fixed point the field's tip traces a circle. The light is circularly polarised; with unequal nonzero amplitudes it would be elliptical.

A half-wave plate gives , and . Light with its field at angle to the axis has amplitudes along and along ; the second becomes . The light stays linear, now at : its plane of polarisation has turned through .

The laser

An atom has fixed energy levels. Between a lower level 1 and an upper level 2 with ( is Planck's constant, the frequency in Hz), three processes occur. Only stimulated emission can build a beam.

  1. Absorption: a photon of energy can lift an atom from level 1 to level 2.

  2. Spontaneous emission: an atom in level 2 drops by itself, emitting a photon in a random direction with a random phase.

  3. Stimulated emission: a passing photon of energy can make an atom in level 2 drop and emit a second photon with the same direction, phase, frequency and polarisation.

AMPLIFICATION AGAINST ABSORPTION

Two levels of one state each, in light of frequency : stimulated emission and absorption then have equal probability per atom. is a rate (per m per s); , are atoms per m in each level. Light grows only if : population inversion.

POPULATIONS IN THERMAL EQUILIBRIUM

Thermal equilibrium at temperature (K), levels of one state each; J/K. The exponent is negative, so . At 300 K, J; divided by J/eV this is eV. At 633 nm, eV, so the ratio is .

Pumping light across the same two levels cannot reach inversion: it lifts atoms at a rate set by and stimulates them down at a rate set by , and these balance at . Instead, pump at another frequency into a higher level 3, from which atoms drop fast to a long-lived level 2. The pump cannot stimulate them back down, so level 2 fills.

Scheme

How atoms move

What it needs

Three-level

Pump 1 to 3; fast drop 3 to 2; laser 2 to 1

Level 1 is the ground level, so over half of all atoms must reach level 2

Four-level

Pump 0 to 3; fast drop 3 to 2; laser 2 to 1; fast drop 1 to 0

Level 1, well above the ground level 0, empties fast, so a small already exceeds

Two parallel mirrors a distance apart enclose the atoms; one lets a little light out as the beam. The beam is coherent because each stimulated photon copies the phase of the one that triggered it, so the light is one steady wave (Chapter 3). It is monochromatic because the level gap fixes the photon energy and the mirrors sustain only wavelengths with , where is a whole number and the wavelength between them. It is directional because only light along the mirror axis makes repeated trips and grows.

The optical fibre

A step-index fibre is a glass core of uniform index in a cladding of uniform lower index , its end face flat and square to the axis. A ray in the core meets the cladding at from the normal. Snell's law, , has no refracted angle once : no light leaves and all of it is reflected. This is total internal reflection, beyond the critical angle with . So a ray is trapped if . Take rays in a plane that contains the fibre axis, so each crosses the axis; rays that spiral round the axis obey a different limit. How steeply may such a ray enter the end face?

STEEPEST RAY THAT STAYS TRAPPED

Straight fibre. A ray in the core at to the axis (the normal to the end face) meets the wall at , so and trapping needs . Use at equality.

ACCEPTANCE ANGLE AND NUMERICAL APERTURE

Snell's law at the end face: ; is the outside index (1.00 for air) and the outside angle from the axis. Multiply the last formula by . is the acceptance angle: rays inside that half-angle cone are guided. If , all angles up to are accepted.

WATCH OUT FOR

The acceptance angle lies outside the fibre; it is not the angle inside the core. Test: multiply each angle's sine by the index of the medium that angle lies in: .

WORKED EXAMPLE

A fibre has core index and cladding index , and is used in air. Find its numerical aperture and acceptance angle.

Solution
  1. Use because a ray is guided only if it meets the wall at or beyond the critical angle.

  2. and , so the difference is and NA .

  3. In air , so and , measured in air from the axis.

Answer: NA ; acceptance angle

Check yourself

CHECK YOURSELF 1

Linearly polarised light of intensity meets an analyser whose axis is at to the field direction. What intensity emerges?

  1. (A)

  2. (B)

  3. (C)

  4. (D)

Answer and solution

Answer: (C)

  1. Malus' law: .

  2. , so . Option D is the amplitude ratio, not the intensity ratio.

CHECK YOURSELF 2

A quarter-wave plate is cut from calcite with the optic axis parallel to its faces. Take and a vacuum wavelength of 589 nm. Find the thinnest plate thickness in µm.

Answer and solution

Answer: (accepted range )

  1. .

  2. nm.

  3. nm µm.

CHECK YOURSELF 3

Linearly polarised light falls normally on a half-wave plate, with its field at to the plate's optic axis. Through what angle, in degrees, has the plane of polarisation turned when the light emerges?

Answer and solution

Answer: (accepted range )

  1. A half-wave plate reverses the field component across the axis, so the field leaves at to the axis.

  2. From to is a turn of .

CHECK YOURSELF 4One or more options are correct

Which statements about a laser are correct? and are the populations of the lower and upper laser levels, each a single state.

  1. (A)

    A stimulated photon has the same direction and phase as the photon that triggered it.

  2. (B)

    Light is amplified only when .

  3. (C)

    Strong light pumping across two levels can make larger than .

  4. (D)

    In a four-level scheme the lower laser level stays almost empty.

Answer and solution

Answer: (A), (B), (D)

  1. A is the definition of stimulated emission.

  2. B follows from .

  3. C is false: pumping a two-level system gives at best.

  4. D is true: the lower level empties quickly to the ground level.

Used in these GATE topics