IAE Academy

GATE 2026 BT GA Q.10: solution and answer

GATE 2026 · BTGA Q.10 · 2 marks · MCQ

As shown in the figure, circle with center and radius touches the square at points and while circle with center and radius touches the square at points and . The two circles touch each other at .

Given cm and cm, ______ cm.

GATE 2026 BT GA question 10: A square with V at top-left, Y at top-right, W at bottom-left, X at bottom-right, each side 4 cm (VY = 4 cm marked…Tap to open full size
Figure from the GATE 2026 BT paper. It is part of the question.
Figure description

A square with V at top-left, Y at top-right, W at bottom-left, X at bottom-right, each side 4 cm (VY = 4 cm marked along the top, VW = 4 cm marked along the left side); right-angle marks at Y and X. Small circle C1 (centre O1, radius r1 = 1 cm marked by a dotted arrow from O1 to the right) sits in the bottom-left corner, touching the left side VW at P and the bottom side WX at Q. Larger circle C2 (centre O2, radius r2 marked by a dotted arrow from O2 to the left) sits in the top-right corner, touching the top side VY at S and the right side XY at R. The two circles touch each other externally at T, between them.

  1. (A)

  2. (B)

  3. (C)

  4. (D)

Answer and solution

ANSWER

cm, which is option (C).

Official answer: CSource: Official answer key, GATE 2026 BT (IIT Guwahati)

  1. Place coordinates: , , , . A circle touching two perpendicular sides has its centre at a distance equal to its radius from each of those sides.

  2. touches the left side and the bottom side , and , so .

  3. touches the top side and the right side , so .

  4. The circles touch externally at , so the distance between centres is the sum of the radii: .

  5. Both centres lie on the line , and the horizontal and vertical differences are each (positive, since ). So .

  6. Equate: , so .

  7. Check: cm, which is larger than and fits the figure, where is the larger circle. This is option (C).

KEY IDEA

A circle in a corner of a square has its centre on the diagonal, at a distance equal to its radius from both sides. Two circles touching externally have centre distance equal to the sum of their radii.

WATCH OUT FOR

Writing the centre distance as or using (internal tangency). Another slip is forgetting the factor for the diagonal distance, or leaving the answer as without rationalising.

From the GATE 2026 BT paper. Every question of this paper · Download the full paper · All 39 Geometry questions, with notes

More Geometry questions